HOME > 배터리 & 충전기 > 충전기

ProTek RC "Prodigy 610 QUAD AC" LiHV/LiPo AC/DC Battery Charger (6S/10A/100W x 4)
판매가격 : ₩318,128
$239.99
상품상태 :신상품
브랜드 :ProTek RC [브랜드바로가기]
모델명 :PTK-8517
구매수량 :
제품상태 :
총 금액 :
This is the ProTek R/C "Prodigy 610 QUAD AC" LiHV/LiPo/LiFe/NiMH AC/DC Battery Charger. A quad port AC/DC charger that can handle 6S packs, is capable of 10 amp charge rates, worldwide 110V/220V voltage versatility, with 100 Watts of power per side...the next generation of Prodigy has arrived. Backed by ProTek R/C's revolutionary customer support, the Prodigy 610 QUAD AC delivers the power you need to get your batteries charged fast and eliminates the need for an external power supply!

The Prodigy 610 QUAD AC delivers a variety of powerful, yet useful features. The Digital Power setting allows users to power additional DC powered equipment, while the Pre-Charge function gives users an opportunity to save Lithium batteries that have been discharged too far. Additionally, compatibility with all common battery types means the Prodigy 610 QUAD AC is an all in one solution for your battery management needs.

These features only scratch the surface of what the Prodigy 610 QUAD AC delivers. Pick one up and see for yourself why Protek R/C is found on the benches of some of the most respected R/C professionals in the world, including racer Atsushi Hara, pilot Tim Jones and more. The next generation has arrived. Don't get left behind.

Hi-Voltage Capable
This charger features a Hi-Voltage LiHV mode that allows you to safely charge Hi-Voltage LiHV capable batteries. You can adjust the charging end voltage of this mode up to 4.40V per cell, which is considerably higher than 4.20V per cell of an ordinary LiPo battery. Charging at this higher end voltage requires a Hi-Voltage LiHV capable battery, but the power gains are significant to the overall punch and power for the R/C model. But please note: battery voltages exceeding 4.20V per cell is prohibited from sanctioned racing rules, such as ROAR, IFMAR, etc.

 

Prodigy 610 QUAD AC Features:

  • QUAD Channel Digital AC/DC Balance Charger
  • Maximum 10A Charge Current, up to 100W Per Channel
  • Maximum 5A Discharge Current, up to 20W Per Channel
  • 10 Charge/Discharge Profiles
  • 110V or 220V AC Input
  • Hi-Voltage LiHV charging mode allows charging end voltage up to 4.40V
  • Pre-Charge Function to Help Restore Lithium Packs with Cells Below 3.0V
  • Digital Power Program Delivers 3V - 24V to Power Other DC Devices
  • Supports up to 6S Lithium & 15 Cell Nickel Battery Packs
  • Lithium, Nickel & Lead Acid Compatible
  • Heavy Duty XT 60 DC input Connector
  • ±0.01 Balance Tolerance Range
  • Multiple Safety Functions
  • Heavy Duty Metal Case
  • Back-Light Screen
  • Efficient Heat Sink

Charger ModelProdigy 610 QUAD AC
AC Input Voltage RangeAC 110V or 220V
DC Input Voltage RangeDC 11.0V - 18.0V
Charge Current Range0.1 - 10.0A
Discharge Current Range0.1 - 5.0A
Charge Power LimitMax. 100W x4
Discharge Power LimitMax. 20W x4
Balance CurrentMax. 250mA
Balance Tolerance±0.01V
NiCd/NiMH Cell Count1 - 15 Cells
Lithium Battery TypesLiHV, LiPo, Li-Ion, LiFe
Lithium Battery Cell Count1 - 6 Cells
Pb Battery Voltage2 - 20V
Digital Power3 - 24V
Weight1250g
Dimensions208x170x63mm

NOTE: To determine if this charger is suitable for your application, you must perform this calculation to determine the maximum amp rate the charger can supply. Divide the Watts of the charger by the Voltage of the battery pack. This will tell you the maximum amp rate the charger can deliver (Watts / Voltage = Amps). So using the 612 QUAD AC as an example and a 6S LiPo battery pack, would be 100 Watts divided by 22.2 Volts, which equals 4.5 Amps. This means that the charger can supply a maximum of 4.5 amps to a 22.2 Volt 6S battery. This amp rate will gradually reduce as the battery voltage increases during the charge cycle.

IMPORTANT:
1) DO NOT leave the battery in your model when charging
2) DO NOT leave unattended when charging
3) ALWAYS balance charge the battery
4) ALWAYS use a LiPo charging bag
5) YOU MUST use a Li-Poly specific charger to charge the pack (NiMH or NiCD only chargers WILL NOT WORK!)
6) YOU MUST not over discharge the Li-Poly battery pack
7) READ &  UNDERSTAND the instructions carefully before operating this battery 

Includes:

  • (1) Prodigy 610 QUAD AC Charger
  • (1) DC Power Input Cable w/XT60 Connector
  • (1) AC Power Input Cable
  • (1) JST Connector Charge Lead
  • (1) Futaba Connector Charge Lead
  • (4) T-Plug Charge Leads
  • (1) Alligator Clip Charge Lead
  • (2) Battery Clamps
  • (4) XH Type LiPo Balance Board

NOTE: Included power cord is only compatible with Type B 110V outlets. "Type E/F" (PTK-5316), "Type G" (PTK-5317), and "Type I" (PTK-5318) power cords are available and must be purchased separately.

WARNING NOTE: This charger is not recommended for use with Traxxas batteries with ID connectors or Spektrum Smart batteries with IC connectors. Charging batteries equipped with ID or IC connectors may require additional steps in order to safely balance charge your Lipo batteries. Please refer to your vehicle or aircraft owner’s manual for recommended batteries and charging equipment. 



Manuals

배송비 : 기본배송료는 12,000원 입니다. (도서,산간,오지 일부지역은 배송비가 추가될 수 있습니다)
본 상품의 평균 배송일은 3일~14일 입니다.(입금 확인 후) 설치상품의 경우 다소 늦어질 수 있습니다.
배송예정일은 주문시점(주문순서)에 따른 유동성이 발생하므로 평균배송일과는 차이가 발생할 수 있습니다.
개봉으로 상품가치 훼손시에는 교환 및 반품이 불가능합니다.
저단가 상품, 일부 특가 상품은 고객 변심에 의한 교환, 반품은 고객께서 배송비를 부담하셔야 합니다.(제품의 하자,배송오류는 제외)
일부 상품은 신모델 출시,부품가격 변동등 제조사 사정으로 가격이 변동될 수 있습니다.
일부 특가 상품의 경우, 인수 후에는 제품 하자나 오배송의 경우를 제외한 고객님의 단순변심에 의한 교환,반품이 불가능할 수 있사오니, 각 상품의 상품상세정보를 꼭 참조하십시오.